How do you reset the service light on a 2012 Mercedes E class?

Mercedes-Benz E-Class: How to Reset Your Service Indicator

Step 1 – Turn ignition to position “1”
Step 2 – Scroll to the “Trip” option.
Step 3 – “Accept” a phone call.
Step 4 – Press the scroll forward button.
Step 5 – Restore to “Full Service”
Step 6 – Reset the service indicator.

How do you reset the oil life on a 2013 Mercedes E350?

Press and hold the phone button and then within 1 second, press and hold the “OK” button. Hold both for 5 seconds until “VEHICLE DATA, DYNAMOMETER TEST, CHANGE BRAKE LINING AND ASSYST PLUS” is displayed. Select “ASSYST PLUS” and push “OK” button. Select “FULL SERVICE” and push “OK” button.

How do you reset the service light on a 2011 Mercedes E class?

Instructions:

Turn the ignition to position 1 (one position before starting the engine).
Press and hold phone button and press and hold down the OK button within 1 second.
Select ASSYST PLUS and confirm with OK button.
Select FULL SERVICE and confirm with OK button.
Select CONF.

How do you reset the engine management light on a Mercedes E class?

Here’s how to reset your check engine light safely:

Wear safety glasses and gloves.
Turn off the ignition, and open the hood.
Locate the battery and find the negative terminal.
Remove the cable from the terminal using a wrench.
Hold the negative cable to the side for 30-60 seconds.
Be careful not to let the cables touch.

What is B service on a Mercedes?

Mercedes-Benz Service B includes the following: Vehicle Passenger Compartment Function Check. Warning/indicator lamps, illumination and interior lighting. Windshield wipers, windshield washer system.

How to reset service Minder light on Mercedes Benz E-class?

The service interval must be reset after performed the maintenance service on your vehicle. Follow the instructions below to reset the Service Minder light on your Mercedes-Benz E-Class: If your vehicle has an ignition button, press the START-STOP ENGINE button without touching the brake pedal.

Is the Mercedes-Benz W213 service light reset?

2017-2020 Mercedes-Benz E-Class Service Light Reset (E300 E400) – The Mercedes-Benz W213 is an automobile produced by Mercedes-Benz since April 2016. This is the fifth generation of the Mercedes-Benz E-Class since 1993.

How do you reset the service indicator on a Mercedes?

Press the scroll forward button until “Conf. Full Serv.” is highlighted. Confirm the selection, and reset the service indicator by pressing the “OK” button. Once the service indicator is reset, place the ignition back to position “0.” Figure 6.

How to reset service warning light on Mercedes-Benz E400?

To reset Maintenance Service Warning Light on 2017 2018 2019 Mercedes Benz E-Class E300 E400, conform to the following instructions: While holding the “Back” button press and hold the Navigation Pad button. After several seconds the service menu should come up.