What sizes does Kerdi-board come in?
With the available panel thicknesses of 3/16″, 3/8″, 1/2″, 5/8″, 3/4″, 1″, 1-1/2″, and 2″ (5, 9, 12.5, 15, 19, 25, 38, and 50 mm), KERDI-BOARD allows the installer to prepare and create a broad range of substrates and building elements for the installation of ceramic and natural stone tile that are flat, level, plumb.
How big should a shower bench be?
between 17 and 19 inches
In general, the recommended height for your bench should be between 17 and 19 inches. You’ll find that most of them will fit within these measures. Also, the Americans with Disabilities Act (ADA) recommend the same height.
Can you cut a Schluter bench?
Can the Schluter®-KERDI-BOARD-SB be trimmed to my desired size? Yes, the KERDI-BOARD-SB shower bench can be trimmed to the desired width using a utility knife .
Does Kerdi board go over drywall?
So, is Kerdi safe to use on drywall? Yes! In fact, it’s advised to use this product on drywall in your bathroom before laying tile and other materials. Without a waterproof membrane like Kerdi, water and moisture can seep through grout, tile and other materials and end up damaging wood studs and subfloor.
What is the best backer board for a shower?
Cement board
Cement board is a good, reliable backer board that works well on both floors and walls. Keep in mind that most tile setters err on the side of caution and brush a waterproofing membrane on top of cement board when it is in wet areas like showers or tub surrounds.
Should a shower bench be sloped?
Slope the top of your bench! Be sure you slope the top of your bench ¼” per foot toward the front of the bench! Water needs to drain off of it rather than collecting in the back of it.
Why put a bench in a shower?
Firstly, a shower bench provides the opportunity to sit down and relax as you let warm, soothing water fall gently over you. Benches are a fantastic place for shavers to safely and firmly plant their feet while shaving their legs, and they also serve as a medium for a romantic shower for two.
Can you put 2 Kerdi curbs together?
Make sure both pieces are glued tightly to the floor and to each other. The Kerdi membrane over the curb will give it all the continuity it needs. Glue and screw or thinset two pieces of the foam curb together.
Do I need a vapor barrier behind Kerdi?
Kerdi is the vapor barrier, there is no need for anything behind it. Kerdi can even be installed over drywall. Cement board and grout are not water proof, if there’s Kerdi no moisture is ever going to be able to get behind it.
How to build your own Kerdi board bench?
Watch the Mike Holmes crew build a one-of-a-kind KERDI-BOARD bench. Creating a customized bench can be accomplished in three easy steps. 1. With a utility knife and 2” KERDI-BOARD cut to size and set your supportive pieces with KERDI-FIX. 2. Again using KERDI-FIX adhere the front of the bench to all fixed elements. 3.
How big is a Schluter Kerdi shower bench?
KERDI-SHOWER-SB is waterproof and ready for tile, leaving only sealing of joints and corners to complete waterproofing. The bench is available in triangular and rectangular configurations in the following sizes (width x depth x height). The triangular benches are 16″ x 16” x 20” (41 x 41 x 51 cm) and 24” x 24” x 20”…
What kind of board to use for shower bench?
KERDI-BOARD is the ideal substrate for creating shower benches that are ready for tile. Simple to cut with a utility knife, KERDI-BOARD can be easily customized to fit your bench size and design specifications.
What’s the difference between a Kerdi drain and a shower liner?
Unlike shower pan liners in traditional assemblies, KERDI is a bonded waterproofing membrane that allows for the direct application of tile with thin-set mortar. KERDI is bonded to the mortar bed or tray and the surface of the KERDI-DRAIN’s integrated bonding flange.
