Can I use my air compressor for painting?

Instead, use an air compressor and a spray gun to quickly apply an even coat of paint to the walls. A spray gun, an air hose and a compressor are the basic tools that you need to get this job moving. Cover everything that you don’t want painted, connect the spray gun to the air compressor and you are ready to paint.

What is a good size air compressor for spray painting?

This is why, while you can use a 6 gallon air compressor to power a nailer, you cannot use it for paint sprayer. Paint sprayers require a compressor with a large tank, preferably from 50 gallons and above, in order to be able to keep up with the spray gun.

How many CFM Do I need to spray paint?

12 CFM
While some air spray guns have a rating of lower than 10 CFM, we’d recommend your compressor CFM for spray painting is at least 12 CFM.

What is the best compressor for painting?

Top 7 Best Air Compressors for Spray Painting

Craftsman Pancake Compressor.
Dewalt Pancake Compressor.
California Air Tools Ultra Quiet Hot Dog Compressor.
Wen Vertical Oil-Free Compressor.
Porter Cable Vertical Compressor.
Makita Stacked Pontoon Air Compressor.
Industrial Air Portable Pontoon Compressor.

How big of an air compressor do I need for a HVLP spray gun?

I usually recommend that you use a compressor that has a minimum of 60 gallon tank and produces around 13 CFM.

Can I spray paint with a 6 gallon compressor?

compressor is recommended for continuous spray and a 7 to 29 gal. compressor for intermittent spray, but it is not recommended for 1 to 6 gal. The air compressor will probably run all the time. I have a 13 gallon air tank and it will paint a car.

What is the best air compressor for painting cars?

Painting a Car – What Size Air Compressor To Paint Your Car? It’s recommended to pick yourself up a 60 Gal tank with a 5-6 HP compressor that put’s out enough CFM that will supply your spray gun. Look for CFM in the ranges of 14-18 at 90PSI.

How much PSI does a paint gun need?

10-15 psi when trigger is pulled for base coat is what most say to set your gun at. Personally I spray at about 17 psi when spraying base coat and 20-25 for clear coat using the low volume low low pressure spray guns. The normal scfm that these guns use is 5-7 scfm cubic foot per minute.

What is the best pressure for spray painting?

Setting the air pressure to about 28-29 PSI for clear will ensure you having great flow out. Most HVLP spray guns will use 10-14 scfm at 40 psi. This is volume of air pressure per cubic foot.

How do I choose a compressor for painting?

As a rule of thumb, it is best to get an air compressor with a tank capacity of 50 gallons and above. The key is to get a higher CFM rating for the compressor as compared to the CFM rating on the paint gun.