Can Return air vents be covered?
Keeping your cold air returns clear is the key to keeping your A/C system in great shape. Avoid covering your cold air return vents with curtains, drapes or rugs. Always check your air filters and replace them when needed. Clogged air filters can also cause cold air return blockages.
How can I make my air vents look better?
How to Make Over Your Ugly Air Vents
- Conceal it. Out of sight, out of mind.
- Paint it. Hide an air vent in plain sight with a fresh coat of the same paint color you used on the walls.
- Switch out the cover. Say goodbye to those sad slats and replace them with a piece of framed, patterned mesh.
- Go shopping.
What happens if you block cold air return?
In the heating cycle, blocked cold air returns can cause the heat exchanger inside the blower compartment to store too much heat and eventually crack. If the cracks are too large, the furnace can emit carbon monoxide into your home’s air. Such a condition normally requires a complete system replacement.
What happens when you cover up a return vent?
Blocking air return vents causes your system to work harder, as there is less air flow to move the air back to the furnace. This continued strain on the HVAC system can lead to a decrease in performance and more HVAC repairs down the road.
How do you cover a hole in a floor vent?
Filling the holes is the easy part. You put a scrap of 2×4 under the floor across the hole on each side and run screws through the existing subfloor to fix the scrap in place. Then just fit a piece of sub floor in the opening and screw it onto the 2×4’s. The hard part is replacing the flooring itself.
How do I cover my vents?
Hiding the Vent. Place a piece of open furniture in front of the wall vent. Find a tall piece of furniture with an open, free-flowing design that allows air to drift through and around the space. Look for a table, chair, cabinet, or hutch that can maintain airflow without creating a blockage.
What color should floor vent covers be?
Black registers and grilles are excellent in more modern spaces. Brown or tan registers and grills: A little more neutral than black, brown and tan registers look great in rooms with wood paneling. They also tend to blend better in more traditional homes.
Can I spray paint my air vents?
So if you are looking to do some simple upgrades – clean off those vent covers and give them a coat of spray paint! This is a great upgrade project to do if you are planning on selling your home too to make it more appealing to buyers.
Do you need a return air vent cover?
One not-so-attractive HVAC element that is present throughout the home is the return air vent. Completing this project yourself instead of ordering a designer vent cover online can save you a lot of money and allow you to create exactly what you’re looking for.
What kind of cover is cold air return?
This Solid Cast Oversized Cold Air Return Decorative Contemporary Cover in Bronze comes with matching mounting screws to make installation a snap. The cast bronze material is the same as the metals. This alloy was used because it is very durable, strong, and will not rust or corrode.
What do I need to make air return cover?
To make it easy to remove the frame, I countersunk the screw holes where it’s secured it to the studs and covered the holes with wooden buttons (also called screw hole plugs). If you need a frame that opens, you will need to secure it to the studs with hinges.
How big is a decorative air return grille?
Made of Urethane Resin to fit Over a 8″x8″ Duct or Opening. Total Size of Vent is 10”x10″x3/8″, for Wall & Ceiling grilles (not for Floor use) . Usually ships within 6 to 10 days. Decorative Grille, Vent Cover, or Return Register. Made of Urethane Resin to fit over a 14″x14″ duct or opening.
