How do I fix my iPod touch screen it wont work?

Do a hard reset of your iPod by holding down the Power and home buttons for 10 seconds simultaneously. The Apple logo should appear within 10 seconds, if it doesn’t you may need a new battery. Connect your iPod Touch to it’s charger and either charge on your computer or via a wall outlet.

What to do with an iPod that doesn’t work?

Force restart your iPod

iPod nano (7th generation) Press and hold both the Sleep/Wake and Home button until the screen turns off. Wait for your device to restart.
iPod shuffle. Unplug your device from everything.
iPod classic. Move the Hold switch firmly to the off position, so that you don’t see orange by the switch.

How do I enable CD use on my iPod?

How to enable disk use on your iPod shuffle

Open iTunes.
Connect your iPod shuffle to your computer.
Select the Device button near the top-left corner of iTunes.
On the “Summary” screen, check the Enable disk use box (under “Options”).
Click Apply.

Why is my iPod audio not working?

Go to Settings > Sounds (or Settings > Sounds & Haptics), and drag the Ringer and Alerts slider back and forth a few times. If you don’t hear any sound, or if your speaker button on the Ringer and Alerts slider is dimmed, your speaker might need service. Contact Apple Support for iPhone, iPad, or iPod touch.

Why has my iPod touch stopped working?

Your iPod may just need a soft reset. This is the most common reason why your iPod isn’t turning on. Simply, hold down the power button and the home button at the same time. This will reset your iPod and should hopefully solve the problem.

How do I enable CD use on my iPod without iTunes?

Release the “Menu” and “Select” buttons when the Apple logo appears and press the “Select” and “Play/Pause” buttons together until you see the Disk Mode screen.

How do I get my iPod out of disk mode?

To turn iPod Disk mode off:

Toggle the hold switch on and off.
Press and Hold the Select and the Menu button for more than ten seconds. If you have different buttons, try the Play/Pause and Menu buttons instead until the Apple logo appears.
The normal selection screen should appear, your iPod is out of Disk mode.

How do you get your iPod off headphone mode?

If your iPod is still stuck in headphone mode, try resetting it. To do this, hold down the “Sleep/Wake” button and the home button at the same time until the Apple logo appears. This will cause your iPod to reboot itself.

What should I do if my iPod wont turn on?

Charge your iPod for at least 30 minutes: Connect your iPod to the charging cable that came with your device. Plug the other end of the cable into power: Use a USB adapter plugged into a wall outlet or a USB 2.0 or 3.0 port on a computer (not a keyboard) that’s on and not in sleep mode.

How to turn off the hold switch on an iPod Nano?

iPod nano (5th generation) and earlier 1 Turn off the Hold switch by sliding it so you can’t see any orange. 2 Press and hold the Menu button and the Center (or Select) button. 3 Keep holding both buttons for eight seconds or until an Apple logo appears.

Why is the click wheel on my iPod Classic not working?

In this instance, re-connecting or replacing the hard drive cable ( thin or thick) first is a good idea. If the click wheel is not seated correctly, it is possible that the iPod will go to this screen. Be sure that the bar on the click wheel is completely flipped down to ensure a positive connection.

What to do when your iPod screen goes blank?

Press and hold the Play/Pause button until the screen goes blank. Wait 30 seconds, then press any button to restart the iPod. Slide the power switch to the right, so that no green is showing. Wait 30 seconds, then slide the switch back to restart the iPod. Turn off the Hold switch by sliding it so you can’t see any orange.