How do I fix my Weber grill?

How To Reset The Regulator When In Bypass

Turn off all the burners and close the tank valve.
Wait 60 seconds.
Open the tank valve fully and wait a few seconds for pressure in the regulator and gas hose to equalize.
Open the grill lid, then open one of the burner control knobs and light the grill.

How long does a Weber Q last?

With proper care and maintenance, a good Weber grill will last 10-15 years, and sometimes even more.

Why won’t my Weber Q heat up?

If you are using a Weber propane grill and it is not heating up, you may have inadvertently set off the bypass safety mechanism in the gas regulator. Turn on the gas at the tank and wait a minute or two for the pressure in the tank and hose to equalize. Then turn on the burners and ignite them as you normally would.

Why does my Weber grill not start?

Make sure that the igniter is making a clicking noise when you press the igniter button. If it doesn’t click, then the wires may not be connected properly, the battery may be dead or installed incorrectly, or the igniter module may have failed.

Is Weber worth the money?

The quick answer is that almost all Weber grills are worth the money. The value comes from the long term cost of ownership combined with amazing grilling performance. When Weber grills are compared directly against other brands of similar quality it becomes clear that the price of a Weber grill is very reasonable.

Why is a Weber grill so expensive?

High-Quality Materials Most of the mass-produced grills use cheap materials that rust and bend within a few years. Weber grills are made using premium-grade stainless steel or porcelain-coated enamel. All of these materials cost more to build but creates a durable, resistant, and rust proof surface.

Why is my Weber grill not lighting?

It could be a worn-out spark module, a loose wire or other connection, a dead battery, corrosion or dirt on the igniter tip, or cracked porcelain on the igniter element. If the grill doesn’t light using the match, check for low or no gas flow. Your problem could be as simple as a low gas tank.

Are there any issues with the Weber Q Grill?

In my career as a gas fitter and barbecue salesman I have encountered literally thousands of people that have issues with their Weber Q grill not getting hot enough, or perhaps not lighting at all.

What should I do if my Weber grill burners are not replaced?

While you have the grill open take a grill brush to the sides of the grill and the burners (if not being replaced), as well as a shop vac to clean out the years worth of food and gunk that is probably lining the inside of your grill. Pop on your new flavorizer bars and grates and you’re done!

How to make a Weber Q low flame?

1 x Barbecue hose and regulator, Any length with do. 1. Disconnect any hoses and tanks from barbecue. 2. Remove cooking grill and burner from barbecue. Burner is held down with a 7/16″ nut and bolt, or a 3/8″ bolt. 3. Pull off control knob and remove brass lock ring from gas valve with an adjustable wrench.