How do I setup my Uniden Guardian app?

How do I setup my Uniden Guardian app?

Wired Setup – Connect the camera to your router using the microUSB to Ethernet cable provided. Connect to power. After about 45 seconds, the green LED begins to flash (3-flash/pause pattern), indicating that the camera is in Pairing mode. Go to the next section – Connect Camera and Mobile Device.

How do I connect my Uniden camera to my phone?

A: Go to Settings > Camera > Pairing. Press the number of the camera to pair, then press the pairing button on the camera within 30 seconds.

How do I reset my Uniden Guardian password?

You can reset the password through the QR code or the security questions. To reset through the QR code, make sure the Enable check box is selected in Main Menu > SYSTEM > SECURITY > Password Reset. To reset through the security questions, make sure the security quesitons is configured.

How do I setup my Uniden Appcam 21?

You must have your router password.

  1. STEP 1 – SET UP CAMERA AND APP. Attach the stand to the camera.
  3. STEP 3 – CONNECT DEVICE TO ROUTER. Select the router you want the camera to use to connect to the internet and then enter the router’s password.

Why won’t my Uniden camera connect?

Make sure the camera and your mobile device connect to the same WiFi router. Make sure the WiFi router is enabled. The camera does not find the router to connect to Make sure you selected the correct router in your device WiFi setting. Make sure you entered the correct password for the router you selected.

What is the DID code for Uniden Guardian?

The default security code is set to 123456. We recommend that you change this code to something you will remember. You will need the code to access your video from a remote device such as a smart phone or PC.

How do I reset my IP camera without reset button?

All you need to do is hold down the power button for about 12 seconds when the power is off, and wait for it to reboot before releasing the power button.

How do I find my IP camera password?

If you forget the password, the only way is to reset the IP Camera to factory default setting via hardware reset button. To reset the IP Camera via the hardware reset button, please press and hold the reset button for more than 10 seconds and then all the settings will go to the default settings.

How do I reset my Uniden camera?

On the Devices Page, tap and choose to delete camera from the list. To rest the camera, use the provided reset needle to hold the reset button for 5 seconds. A voice prompt “ factory resets succeeds ” indicates the camera has been reset successfully. The field of view of Uniden Solo is 130° diagonally.

How do I get my security camera back online?

You can reset your home router and/or modem. A) Power off the camera (unplug the camera, or hold the button down for 5 seconds until the lights turn off; press it to turn it back on after about 1 minute.) 3. If the camera is still offline, you can factory reset your camera.

Why is my security camera not working?

You can also try restarting your security cameras to address the issue. The best way to troubleshoot a security camera system if it is not working is to reboot it. Rebooting is done to release settings to recalibrate, connections to self-revise, and cache to flush.

Previous post Wann kam der Hip Hop nach Deutschland?
Next post When should I worry about my kitten sneezing?