How do you change the combination on a Samsonite Lock?

Lock Instructions

Step #1. Our combination locks are all pre-set to 0-0-0.
Step #2. There will likely be a little indentation on your lock where you can depress it with the end of a pen.
Step #3. Turn the number dials to the combination you would like to use.
Step #4.
DOES YOUR LOCK APPEAR “STUCK” OPEN AFTER FLYING?

How do I reset my luggage without a reset button?

Start by moving it 90 degrees from the locked position. Press down on the shackle and move it to 180 degrees from the locked position. If this movement doesn’t reset it, try moving to 180 degrees first, pressing down, and moving back to 90 degrees.

How do you unlock a Samsonite tsa007 lock if you forgot the combination?

Just reset the combination:

Set the dial to 000.
Turn the shackle at a 90 degree angle from the lock position.
Push the shackle down (outside of the lock).
Set the desired code.
Pull the shackle up.
Turn it back to the lock position.

How do you fix a combination lock that won’t lock?

Please try resetting the lock again by following the instructions below:

Place lock in the open position.
On the back of the lock, slide the reset lever into the “up” position.
Insert the shackle into the lock and squeeze firmly twice to “clear” it.
Pull up on the shackle to open the lock.
Enter your new combination.

How to set lock code on Samsonite Aeris basic?

How to set the lock code on a Samsonite Aeris basic (and other cases without TSA) – YouTube Instructions – How to change or set the code on a Samsonite case. For other types of lock see our other videos.

Where is the reset button on a Samsonite lock?

Locate the reset button, usually placed to the side of the combination dials. Press the reset button and hold it while rotating the number dials to the desired combination. Set this to a sequence easy for you to remember but hard for others to figure out. Release the reset button after you set the numbers to the new combination.

How is the lock set on a Samsonite attache bag?

Many Samsonite pieces such as attaches and other bags include a three-digit, built-in combination lock. When purchased, the locks are set on a factory default combination that you can change as often as you wish. Step 1 Turn the number dials to the previously set combination, or to “0-0-0”, the factory default combination for Samsonite luggage.

How do I unlock my Samsonite luggage if I forgot the password?

Turn the number dials to the previously set combination, or to “0-0-0”, the factory default combination for Samsonite luggage. Locate the reset button, usually placed to the side of the combination dials. Click to see full answer. Similarly one may ask, how do you unlock a suitcase if you forgot the password?