When did PaceMaster treadmills go out of business?
Pacemaster – Aerobics Inc., the company behind this high-end brand of treadmills and other exercise equipment filed for bankruptcy in 2012 and moved all operations to Canada. You can still find some older models for sale on sites like eBay. Unfortunately, the brand just didn’t last and Trimline went out of business.
What does E04 mean on treadmill?
E04 error code: generally over-current fault:components of control board has burned. replace burned components or replace control board.
What does Error 2 mean on a treadmill?
The error code E2 is indicating that the console is not receiving any information from the reed switch or optic sensor. This is because the treadmill belt is not turning. If the motor would run you would lose the E2 error. Diagnosing why the motor is not running will require a technician and some test equipment.
How do you fix a treadmill that suddenly stops working?
How to Troubleshoot a Treadmill That Stops Suddenly
- Observe the belt to detect any fraying.
- Feel the area in the center of the platform underneath the belt.
- Check the power cable to ensure it’s tightly inserted in the wall socket.
- Check the speed controls.
Do treadmills have a reset button?
Most treadmills just have a reset button or the back of the console will have the hole you can use. If this doesn’t work the on/off button and/or unplugging of the unit will result in a reset being performed. Always keep an eye on the display as this is where you will be told if what you’ve done is successful.
What happened Smooth Fitness?
Smooth Fitness actually closed their doors in December 2012, but quickly got bought out by new owners who I was told had deep pockets. Obviously they were not deep enough. Sales decreased and their brand recognition also decreased. Players like Amazon, Sears and Icon Fitness started dominating online fitness sales.
Did Yowza Fitness go out of business?
Looks like yowza fitness is out of Business. …
Why is my treadmill showing error?
The error code triggers when an object is detected by the folding sensors on the underside of the treadmill. The folding sensors look like small trapezoids: two on the back and two on the front. Make sure there are no foreign objects underneath the treadmill. If no objects are present, inspect the sensors for damage.
How do I fix e01 error on treadmill?
To resolve this problem, follow these steps:
- A. Check the connection between the speed sensor and the controller board.
- B. Make sure that the magnet is properly installed on the front pulley.
- C. Replace the magnet sensor by following the instruction found in this manual.
How do you fix a speed sensor on a treadmill?
How to Fix a Treadmill Speed Sensor
- Unplug the treadmill power cord.
- Trace the black and white wire leads from the motor to the circuit board below.
- Lift the motor at the end opposite the front roller pulley to slack the drive belt.
- Trace the wire lead from the sensor to the circuit board below.
Why is my treadmill stops suddenly?
Treadmills require lubrication to limit the amount of friction between the platform and belt. When the friction increases to a certain point, the machine is automatically set to power off. This may be the cause for the machine to stop working suddenly. Try lubricating the belt.
Where to find serial number on PaceMaster treadmill?
Write down the displayed error code and the serial number located on the treadmill’s front by the power cord if you receive an error message. Contact your PaceMaster dealer if you are unable to resolve the issue; a dealer locator appears at PaceMaster.com. Stop pushing the belt if error code 117 appears on the control panel.
What to do if your treadmill has an error code 425?
Unplug the treadmill and reconnect the black wire harness on the power supply board if error code 133 or 134 appears. Unplug the treadmill and check that the drive motor connection and ceramic fuse are securely attached and do not show signs of wear if you receive error code 425.
What to do if your PaceMaster treadmill is not working?
PaceMaster includes a hex wrench to resolve problems involving the tread belt. Insert the magnetic key into the control power if the treadmill is not operating. Plug it into a wall outlet. Check your household breaker if the treadmill still does not operate.
When to stop pushing the belt on a Pacemaster?
Contact your PaceMaster dealer if you are unable to resolve the issue; a dealer locator appears at PaceMaster.com. Stop pushing the belt if error code 117 appears on the control panel. This often results from a user pushing the belt faster than the selected speed.
