How much HP can a EJ20 handle?
300 whp: The EJ20/EJ25 engines can handle 300 whp maximum with stock internals with no further modifications other than a proper fuel management tune. 400 whp: We suggest a set of forged AMR pistons and billet rods to safely boost up the engine.
What’s the best EJ engine?
Of all the engines in the EJ series, two are clear standouts when it comes to rebuilding for performance applications – the EJ257 and EJ207. The U.S.-marketed STI featured the EJ257, while the EJ207 is considered the holy grail from Japan.
How much power can a 2005 WRX handle?
Official ClubWRX arms dealer. The stock bottom end on a WRX can safely handle anything under 300whp which equals about 380 or so to the motor or less… after that, it’s on borrowed time.
How much boost can a stock EJ205 handle?
The EJ205 handles additional boost and power very well. It’s quite happy in the 300whp range. I wouldn’t worry too much about internals unless you start messing around with more aggressive mods than a bolt on turbo swap.
Why are Subaru engines so bad?
Here are the facts: Subaru experienced lots of engine issues due to head gaskets primarily in the EJ25D 2.5 liter engine and the EJ251, EJ252 and EJ253 liter engines. It was such an issue for Subaru that the automaker extended its powertrain warranty from 5 years/60,000 miles to 10 years/100,000 miles.
Did Subaru ever make a V8?
Subaru BRZ with 362-hp, 2.4-liter V8 is the best thing you’ll hear today.
Is STI worth it over WRX?
The STI is clearly the better performer, but it can cost over $14,000 more than the WRX. The base WRX is an excellent performance car at a great price. If you need a few more comfort and convenience features, upgrading to Premium or even Limited trim won’t break your wallet.
How much horsepower can a WRX handle?
When you get behind the wheel of the WRX STI and WRX STI Limited models equipped with the standard 2.5-liter DOHC turbocharged engine, you’ll receive a whopping 310 horsepower.
How much boost can a 2011 WRX handle?
The WRX’s 2.5-liter turbocharged boxer four still features maximum boost pressure of 14.2 psi and produces 265 hp at 6,000 rpm and 244 lb-ft of torque at 4,000.
What kind of transmission does a jeep T-18 have?
All text is available under the terms of the GNU Free Documentation License. The T-18 is a heavy duty four speed with unsynchronized first gear. These transmissions were manufactured by Borg Warner and they have a cast iron case. The casting number on the drivers side of the T-18 is T-18 or 13-01.
What should I know about the EJ18 engine?
The EJ18 engines are generally reliable and solid units, as long as you follow the manufacturers service schedules, and use a good quality oilthey are regularly serviced and maintained.
What are the parts of a Ford T18 transmission?
Below you will find a detailed parts list for the Ford T18 manual transmission that Ford T18 $ Speed Transmission includes complete rebuilt transmissions, bearing rebuild kits with and without synchro rings, seals, gaskets & small parts, individual bearings, sliders and synchro components, forks, gears, shafts and bearing retainers.
What kind of transmission is Borg Warner T-18?
The T-18 is a heavy duty four speed with unsynchronized first gear. These transmissions were manufactured by Borg Warner and they have a cast iron case. The casting number on the drivers side of the T-18 is T-18 or 13-01.
