What is an outie window?
Outie windows are constructed with the glazing of the window set flush to the outside of the wall assembly – typically with a “nail fin.” These are the types of windows most Americans are used to seeing in a home. Pros: Easier Installation: Installed with nailing flanges to the outer face of the wall.
Should windows be recessed?
They give a clear-cut appearance to your windows. Deeply recessed windows reduce solar heat gain and help bring down the temperature of the room. Renovation Favorite: If you have taken up a renovation project, or the house wall are thicker than usual, recessed windows are a perfect choice.
Do you have to remove siding to replace windows?
Replacement Windows Don’t Require Siding Removal You can easily avoid the need to remove or replace siding during your window project. If the frame and sill are in good condition—free from mold and rot—then we can insert your Simonton windows without having to perform exterior remodeling.
How do you insulate a window?
5 ways to insulate your apartment windows
- Use window insulation film. Window film creates an insulating barrier between the interior of your apartment and your windows.
- Cover your windows with bubble wrap.
- Install removable magnetic window insulation.
- Use rope caulk to seal cracks.
- Add thermal curtains to your windows.
Do you need house wrap with foam board?
The answer, happily, is yes. In fact, the two products combined make your home super-insulated from outside wind and weather. If you choose to install house wrap with rigid foam, generally, it should go under the insulation, not around it.
Can you remove nailing flange to a window?
1 Answer. Vinyl windows for “new construction” can usually have the nail fin cut off with a knife or saw. Then you install the window using the replacement or upgrade instructions. Usually consisting of screws in the sides, insulation and shims.
Do replacement windows have nailing flange?
Replacement windows, sometimes called “inserts,” don’t have nailing fins because they are typically installed with the existing cladding still on the wall, which means there is no exposed sheathing for them to be fastened to.
What’s the difference between innies and Outies in a house?
Innies set the windows into a recess, which protects windows from the weather. Outies add deep window sills—great for plant shelves, cat perches, and bowling trophies. What all of these details have in common is that there is a continuous air barrier, a continuous water barrier, and a continuous thermal barrier for the wall.
Which is easier to install, outie or outie windows?
Each approach has advantages. Outie windows provide deep interior stools that many homeowners appreciate, and outie windows are (arguably) easier to flash and easier to trim on the exterior.
Which is better mineral wool or innie wall insulation?
On the other hand, the innie approach does a better job of protecting window sash from the weather, and innie windows perform better from an energy perspective. If you’re planning to install mineral wool insulation on the exterior side of your wall sheathing, innie windows make the most sense.
What kind of foam do you use for innie windows?
Current trends favor thicker and thicker foam; many cold-climate builders now routinely install 4 or 6 inches of EPS, XPS, or polyiso on exterior walls. Innies or outies?
