What do you put in a treasure chest?
Fill the treasure chest with beads, gems and jewels from craft stores and flea markets. Let kids create original jewelry from old, broken jewelry pieces you salvaged from your jewelry box. Add some new ribbons, elastics and cords and have the kids string new treasures.
What is the meaning of treasure chest?
: a large box that is filled with gold, silver, jewels, etc. —often used figuratively The house is a treasure chest filled with artifacts from a bygone era.
What do you need for a hope chest?
Ideas for Items to Include in a Hope Chest
| Practical Items | Sentimental Items |
|---|---|
| Blankets and quilts | Christening gown |
| Bed linens | Old diaries, cards and love letters |
| Dresser scarves | Heirloom wedding dress |
| Table clothes, napkins & runners | Firsts: stuffed animal, X-mas ornament, etc. |
How do you make a treasure chest out of a shoebox?
Instructions:
- Wrap the outside of a shoebox overlapping edges approximately ½ inch. Trim at corners and folds, if needed to reduce any excess bulk on the inside.
- Measure inside panels of the box.
- Cut paper to line the box ¼ inch shorter than top edge. Glue paper to the inside of the box.
- Decorate outside as desired.
What do you put in a pirate treasure chest?
How to make your own pirate treasure chest?
Step 1: Cut the Chest Pieces – Determine the desired size of the Treasure Chest. Select the 1″ x 1″ stock; crosscut to the depth of the chest; (add 1/8″ for the edging material) 10 1/8″ Select the 3/4″ Plywood Panel; rip two pieces @ 10″; crosscut the Front, Back and two Side pieces per the layout diagram above
What’s the best way to cut a treasure chest?
If yours are more consistent, your job will be easier. Rip your boards at a 10 degree angle using a table saw, as shown in the photo to give them a trapezoidal cross section. Alternate the angle, and keep the fence setting for all cuts. If you organise things well, you won’t waste much wood at all.
How big should a treasure chest board be?
To make your life easier, your treasure chest should be no more than twice as wide as your widest board. You’ll see why in the next step. You generate the pattern for the ends just by tracing the trapezoidal outline of one of your boards 10 times on another board, as shown in the picture.
How do you make a wooden treasure box?
The bottom panel cut to size with a rabbet cut around the edge. The box goes together like a log cabin, to form box joints on the corners. First, I scorched each piece with a torch to mimic wear and erosion to make the box look old: The box part done.
