Is Flat Foot shifting faster?

flat foot shifting can actually be EASIER on the tranny than traditional lift shifting. the key is in properly setting your FFS rpm point. once done, you will achieve perfect rpm drops during every shift. in turn that creates much less shock load on the drivetrain once you do let out the clutch.

How do I stop my flat foot from shifting my Cobb?

Available Adjustments and How to Make them:

Go to “Tune” Menu.
Select “Adjustments.
Select “Change Flat Foot Shifting RPM Limit.
Adjust to whatever RPM desired and then click the center button to save those changes.

What is flat foot shift rpm?

For example, if the vehicle is moving and you push in the clutch to shift and the Flat-Foot Shift limiter is set to 4000 RPM, engine speed will be limited to 4000 RPM allowing you to remain on the throttle during the shift.

What RPM should I set for launch control?

Best bet is to turn advance trac off and launch at about 2300.

What is flat floor shifting?

FLAT-FOOT SHIFTING allows you to keep your foot flat on the accelerator while changing gear, so as to minimise gearchange time and keep engine speed and torque up in preparation for the next gear. It is also possible to adjust the torque to maximise power when engaging the next gear.

What happens when you have flat feet?

Flat feet tend to cause another condition called overpronation, which is when the ankles roll inward while you’re walking. This can lead to foot and ankle pain. Because your feet are the basis of support for your entire body, having flat feet and overpronation can cause problems with your spinal alignment.

Is Flat Foot shifting bad for a car?

So, power shifting isn’t necessarily awful for synchronizers. It is, however, bad for the clutch. That can cause an unexpected “clutch kick,” which could kick the rear end out (in a rear-wheel-drive car) and cause the driver to start to lose control.

Does launch control build boost?

First of all, a launch control system has multiple jobs to complete to get a car off the line as efficiently and quickly as possible. It needs to eliminate wheel spin and hop, maximise useable power, weight transfer and traction and – in forced-induction powertrains – it has to build boost to a required level.

Is clutchless shifting bad?

Clutchless up shifts are fine because the RPM disparity between sequential increasing gears during acceleration is harmless. It allows you to shift quicker to get back on the power as soon as possible. Under normal riding conditions however, there’s no real benefit to it.

How does flat foot shifting work on a GTI?

This feature helps to minimize shift times and keeps boost from falling off as much between gears. After the appropriate Flat Foot Shift RPM Limit has been dialed in, the ECU will help to hold RPMs at that level when the clutch is depressed.

Why do you need flat foot shifting in a manual transmission?

Flat Foot Shifting, also referred to as “No Lift Shift”, enables drivers of manual transmission cars to keep the accelerator pedal 100% planted during shifts when every MPH or tenth of a second is important. This feature helps to minimize shift times and keeps boost from falling off as much between gears.

What are launch control and flat foot shifting?

This comes in handy when having a car custom-tuned on a non-linked AWD or 2WD dynamometer. A full how-to guide can be found here: COBB Custom Features: VW Mk7 Launch Control, Burnout Mode, and Flat Foot Shifting. Launch Control RPM is now adjustable by the user through the Accessport!