Can you use a chain as a chain whip?
It’s pretty obvious you’ll need a chain whip. Since the cassette rotates, you’ll need to keep it in place while your remove the lockring that tightens it on its freehub body. It’s basically a handle with a piece of chain at the end (yes you can make the thing yourself if you want to).
What is a bike chain whip?
The chain whip is used in conjunction with a cassette removing tool to remove the lockring of a cassette from the freehub body. It is also used to remove a track cog from a hub.
What is a cog spanner?
The Pedro’s Cog Wrench is back for 2013 in a new updated design. We’ve taken this proven tool and married it to the popular handle found on our Equalizer Pedal Wrench. This simple elegant solution for holding your cassette during removal securely holds 11 or 12 tooth cogs and works with most cassettes on the market.
Can I make my own chain whip?
However, there’s not really any other multi-functional tool that you can substitute. The good news is: It’s not a tool with intricate specifications made of hard-to-find, expensive parts. So, you can use old bike parts and scrap wood, and it’s very easy to make your own chain whip!
Do you need a chain whip to fit a cassette?
Grease threads of lockring and thread lockring into freehub. Install cassette lockring tool and install quick-release skewer. For installing lockring, use of the sprocket chain whip tool is not required.
Why do you need a chain whip?
A chain whip , in the bike context, is a tool that you never knew you needed, until suddenly you did. You use it prevent the bike cassette turning (those pesky free-wheeling bike hubs…) whilst you untighten the lockring.
Do you need a chain whip to remove cassette?
Tools for Changing a Bike Cassette In order to remove and replace your cassette, you need to unscrew this lockring. You’ll need three tools to do this: a chain whip, a cassette lockring remover and a large adjustable crescent wrench.
What can I use instead of chain whip?
If you have a regular claw hammer and another length of chain, then you can create your own chain whip. Just drape the length of chain through the claw part of the hammer with the majority of chain going away from the handle of the hammer.
Do you need chain whip tools?
You need to take your cassette off the bike, either to clean it or to replace it. It is one of your core principles that you like to avoid shredding your fingers whilst undertaking bike maintenance. You therefore need a chain whip and a lockring tool.
How to use a chain whip for venture?
Use the chain whip: Hold the cogs in a clockwise direction with the chain whip. Hold the cassette: Prevent the cassette from spinning, when you want to remove the cassette.
Can you use chain whip on 11 gear cassettes?
It is true that if you use the chain whip in the on any gear but the largest cog, it will not fit (part of the magic of 11 and 12 gear cassettes is they narrowed the distance from one gear to the next allowing for more gears, but it also requires a special, thinner chain).
How do you use a chain whip on a bike?
Here’s A Guide on How to Use Your Chain Whip. Remove the rear wheel: Mount the bike so that you can remove the rear wheel easily. Remove the skewer. Select the right type of remover. Use the chain whip: Hold the cogs in a clockwise direction with the chain whip. Turn the sprockets: Rotate the
Do you need chain whip to install lockring?
For installing lockring, use of the sprocket chain whip tool is not required. The FR-5.2G speeds installation as well. Simply insert the FR-5.2G into the lockring splines and tighten fully. SRAM XD freehubs and sprockets are considered a cassette system. The lockring mechanism is hidden down inside the cassette stack.
