What side of a watch band should links be removed?
Try removing the links from the 6 o’clock side so the clasp may be balanced at centre or near centre of the wrist.
Can you remove watch links yourself?
If you’re not confident about removing watch links yourself or don’t have the right tools, you can leave it to the professionals. Watch repair shops, key cutting places, and jewelry stores offer this service for a small fee.
How do you take links out of a watch without arrows?
If the links of your watch don’t have any arrows, then push the pins through from the side where you can’t see any seam in the pin. But if there are arrows on the links, then only remove the links that have the arrows printed on them.
How many links should I take out of my watch?
Step 1A: Measure When possible try to take out an even number of links from each side of the band, so that your watch will be balanced and sit evenly on your wrist. For example, if two links need to be removed total, you should be removing one link from each side of the clasp.
How do you remove a watch link from a watch?
2) Place your watch band flat and flush to the left hand side wall on the watch link remover. 3) Line up the link that you want removed with the pin. 4) Turn the handle so that the watch link remover pin pushes against and pushes out the pin in your watch link.
What happens when you take a watch band Link out?
Place the pin in your parts tray, you will need it to put the bracelet back together again. Watch out for a small metal ferrule. Some watch bands contain small metal ferrules in the middle of joining links that will be released when you take out a pin. It may fall onto the floor or work station, so keep an eye out for it. You will need it later.
How do you reassemble a watch band that has been removed?
Once you have removed the necessary number of links, you can reassemble your watch band by simply reconnecting the links using the removed screw and a screwdriver. Measure the band. You can do this by attaching one end of the watch strap to its case, then wrapping the strap around your wrist.
How do you remove a metal watch strap?
With some metal watch straps, it is necessary to separate the bracelet before you can remove any links. To do this: Remove the spring bar from the watch strap clasp. To identify which spring bar it is, hold the clasp in your left hand, and it will be the one on the left side.
