What is the primary element of Rosemount 1195?
Rosemount™ 1195 Integral Orifice Primary Element. The Rosemount 1195 Integral Orifice Primary Element is engineered to facilitate highly accurate flow measurement in small line sizes (0.5 – 1.5 in. or 15 – 40 mm). The primary element is provided in a meter run for easy installation and is suitable for flow measurements of gas, liquid or steam.
What do you need to know about Rosemount 3051s?
Rosemount 3051S Coplanar Differential, Gage, or Absolute Transmitter Ordering information: Table 1 ■ Coplanar platform enables integrated manifold, primary element, and seal system solutions. ■ Dual-capacitance Saturn sensor technology corrects for overpressure and line pressure effects. ■ Calibrated spans from 0.1 inH 2
What is the gage pressure of Rosemount 1151?
Rosemount 1151 Pressure Transmitter Provides reliable measure of differential, gage, and absolute pressure or liquid level. Ranges from 0.5 inH20 to 0-6000 psig. Rosemount 2088 Pressure Transmitter Economical, compact, and rugged transmitter, ideal for gage and absolute pressure ranges from 1 to 4000 psi. Product Data Sheet
What should I know about Rosemount 1199 diaphragm seal?
For additional information, refer to the following product data sheets before ordering a Rosemount 1199 diaphragm seal: Rosemount 3051S Series of Instrumentation Scalable pressure, flow and level measurement solutions improve installation and maintenance practices.
Where to mount a Rosemount 1195 flow meter?
Mount the Rosemount 1195 in a secure run of pipe as far as possible from pulsation sources such as check valves, reciprocating compressors or pumps, and control valves. Install the Rosemount 1195 in the correct location within the piping branch to prevent measurement inaccuracies caused by flow disturbances.
What is Emerson Process Managem ENT code Q8?
Contact an Emerson Process Managem ent representative to aid in selecting the proper materials to meet the NACE standard. Material Traceability Material traceability is provided for the diaphragm seal, upper housing, and if applicable, lower housing/flushing connection or diaphragm extension, upon selecting the Transmitter Ordering Option Code Q8.
