How much camber does a camber bolt produce?
Normal camber on the stock bolts is around 1.2 max. If you get additional camber bolts (top and bottom) you can get about 2 degrees max.
Are camber kits universal?
These parts should fit your vehicle, they are universal parts. Click a part number for more information.
Is a camber kit necessary?
When you lower the car, the camber will go out and you need a camber kit to fix it. However, I find it is not necessary to correct the camber in most cases. Most people think they need a camber kit because of a tire-wear concern. The reality is, TOE ANGLE kills tires WAY faster than camber ever will.
Can I use 2 camber bolts?
There is no problem running two oem camber bolts. If you need more than -2.0 you should be running camber plates or custom arms, not bolts. One lobed bolt is enough, especially if your car is lowered.
Are camber bolts safe?
There are many users on this forum that safely use their camber bolts and there haven’t been problems. The only time there are problems are when the bolts are not properly installed.. like being over-torqued. Camber plates can still slip and fail too if they are not installed properly.
Does lowering your car increase camber?
One of the byproducts of lowering a vehicle can be an increase in the amount of negative camber. Typically, most passenger vehicles tend not to exceed 1-1.5 degrees as they leave the factory. Having a lesser degree of camber helps with tire wear and is the primary cause for camber correction.
Can you adjust camber on stock suspension?
There are several methods to adjust camber, depending on the vehicle and its suspension. Stock suspensions may feature cam bolts, eccentric washer bolts, turn-buckle joints, or shim adjustments. Shim adjustments are usually found in front suspensions but can be in almost any application.
Will an alignment fix negative camber?
Often the best fix for an issue with negative camber is getting your wheel alignment done, as we said. The cost of getting your wheels aligned is not too steep, but it will cost you a few dollars. One thing you need to remember is that alignment usually is done in pairs.
Is negative camber illegal?
Hellaflush is a trend where people try to drop their car as low to the ground as they can and give as much negative camber to their wheels as possible. It has now been rendered illegal by the SAAQ.
How many camber bolts does a Hyundai have?
This easy to use adjuster provides built-in adjustment over the life of a vehicle just by rotating the head of the bolt. Each kit contains two cam bolt assemblies, enough for both sides of the vehicle.
How do you install camber on a Hyundai?
Remove the upper strut spindle bolt. Line up small tab with cam on bolt. Install bolt with large tab out toward wheel for positive camber or in away from wheel for negative camber. Add lock nut, but do not tighten. Loosen the lower bolt. 4. Reinstall tire and wheel, and readjust alignment equipment.
What’s the best way to install a camber bolt?
Line up small tab with cam on bolt. Install bolt with large tab out toward wheel for positive camber or in away from wheel for negative camber. Add lock nut, but do not tighten.
What’s the difference between positive and negative camber bolts?
It allows both positive and negative camber changes up to approximately 1.75 degrees (depending on vehicle) by replacing the upper O.E. strut/spindle bolt. This easy to use adjuster provides built-in adjustment over the life of a vehicle just by rotating the head of the bolt.
