What is koto veneer?
Koto quarter cut wood veneer is a yellowish white to creamy white. Straight grained to slightly interlocked, with a coarse texture. Also usually high in luster and sometimes attractively flecked. Common Uses for Quarter Cut Koto Wood Veneer: Architectural panels, doors, millwork and cabinetry, as well as furniture.
What kind of wood is Koto?
paulownia wood
Koto, also called kin, long Japanese board zither having 13 silk strings and movable bridges. The body of the instrument is made of paulownia wood and is about 190 cm (74 inches) long.
What is standard veneer thickness?
0.6 mm
The standard thickness is 0.6 mm. Most frequently used wood types are also available as a thick veneer. Veneer retains the natural look and feel of real wood as well as its unique properties, showing authentic colour and pattern variations.
Does veneer come in different thickness?
You won’t find such a thing as a standard veneer thickness, Jack. Thicknesses vary by species, veneer makers and sometimes even with customer preferences. Then measure its thickness, double that to allow for both the top and the balancing bottom veneers, and use that number when machining your other project parts.
Is Black Limba a hardwood?
Is Black Limba a Hardwood? Yes. Both Black and White Afara are hardwoods.
What is ayous wood?
Ayous is a very light, exotic wood, very tender to tender. The timber is light yellow, sometimes even creamy white. Ayous timber is used for interior joinery, for moulding, as well as for boxes and plywood.
What does the shape of the koto resemble?
The shape of KOTO is said to resemble that of the dragon and even the names of various parts of the instrument correspond to parts of dragon’s body. Most KOTO has 13 strings stretched lengthwise over bridges and tied at each end of the body. However, in this concert, KOTO with 17 strings will also be played.
What is paulownia wood?
Paulownia is known in Japanese as kiri (桐), specifically referring to P. tomentosa; it is also known as the “princess tree”. Paulownia wood is very light, fine-grained, and warp-resistant. It is the fastest-growing hardwood. It is used for chests, boxes, and clogs (geta).
Does veneer scratch easily?
Because it’s made from natural wood, wood veneer is prone to scratching and gouging, which can quickly make it look weathered and worn. That’s because the veneer is glued to the core materials underneath, so moisture can seep underneath it and loosen the top layer and cause it to bubble or peel.
What is 10mm veneer?
The 10 or 20 refers to the thickness of the backing material, in this case paperback. The thickness of 1 mil equals 1/1000″ so in the case of a 10 mil veneer the backer thickness is 10/1000″.
Is Black Limba poisonous?
Allergies/Toxicity: Although severe reactions are quite uncommon, Limba has been reported to cause skin irritation and respiratory irritation, as well hives, asthma-like symptoms, and bleeding of the nose and gums. Splinters also tend to become infected and take longer than usual to heal.
What is Black Limba used for?
Our Black Limba is harvested in Tropical West Africa and is commonly used in Millwork products such as furniture, veeners, musical instruments, and turned objects.
What kind of rot resistance does Koto wood have?
Endgrain: Diffuse-porous; solitary and radial multiples; large pores in no specific arrangement, very few; mineral/gum deposits occasionally present; parenchyma vasicentric, diffuse-in-aggregates, banded; medium to wide rays, spacing wide. Rot Resistance: Rated as non-durable; poor insect resistance.
What’s the difference between Koto and sapwood wood?
Koto is one of those woods with little delineation between heartwood and sapwood. The wood?s grain can be straight, but some of the material has an interlocked grain. Material from the two species may have small knot clusters. Koto is sold as lumber, rotary cut into corestock and backing veneer for plywood and also sliced for decorative veneer.
What kind of veneer is used for door panels?
The wood is yellowish-white to cream in color and becomes yellowish-grey when steamed. Sliced veneers are used for door skins and inner surface veneers. Rotary veneer is used for plywood panels and bleaching + dying. Koto Glacier Grey.
Are there any side effects to using Koto?
Allergies/Toxicity: Although severe reactions are quite uncommon, Koto has been reported to cause skin irritation. See the articles Wood Allergies and Toxicity and Wood Dust Safety for more information. Pricing/Availability: Generally available as veneer, prices are in the mid range for an imported hardwood.
