What microphone should I use to record bass guitar?
Best Microphones For Recording Bass Guitar
- Shure SM57.
- Sennheiser e602 II.
- Audix D6.
- Heil PR40.
- Electro-Voice RE20.
Do I need a DI for recording bass?
Direct Injection First and foremost, you should always record a DI track. Even if you don’t use it when setting your tone, it’s a great safety net to have when mixing.
How do you record bass with DI?
DI Recording Just plug your bass straight into your interface, or use a DI box. Some producers won’t even think about miking up the amplifier. They’ll just plug the bass into a DI box and plug it straight into the interface. This takes all the acoustic problems out of the equations, which is great.
Which type of microphone is the most fragile?
Ribbon microphones are the most fragile of the three capsule types mentioned here due to the suspension of a very thin ribbon element within the capsule. The delicacy of this design makes ribbon microphones exceptionally well suited for picking up the nuances of intricate sound sources.
Can you record bass directly to computer?
Two must-have pieces of gear for recording your bass guitar, regardless of which method you choose, is an audio interface and recording software (also known as a DAW). This method consists of plugging your bass guitar directly into your audio interface, which is then plugged into your computer running your DAW .
How do I record bass without an interface?
Without an interface there’s no point having a computer. You can use a handheld digital recorder, with built in mic(s). Or go for an all-in-one recorder like a Tascam Portastudio. Or buy a tape recorder.
How do you get a good DI bass tone?
If you want more attack to your sound, try boosting the middle frequencies around, say, 700 Hz. If you want to accent the string sound you can boost the frequencies around 2.5 kHz. It will bring out that string sound that some people prefer in their bass sound.
Can you run a bass guitar through a PA system?
P.A. speakers are designed to handle all of the instruments. An electric bass won’t hurt them.
Why my mic volume is so low?
Increase the volume of your microphone. In Input, ensure your microphone is selected under Choose your input device, then select Device Properties. On the Levels tab of the Microphone Properties window, adjust the Microphone and Microphone Boost sliders as needed, then select OK.
Which is better a microphone or a di?
When you’re looking for deep bass, it’s usually the case a high-quality DI will have a lower frequency response than a microphone. For instance, I always use the Manley Tube Direct DI. The Manley has a frequency response down to 12Hz. While your most common bass microphones don’t go that low.
Which is the best di for a bass guitar?
Some of the most popular DIs for bass guitars come from Countryman and Radial Engineering. Your Whirlwind DI will work fine too, but you may notice an improvement in tone with a unit that uses larger transformers, like the aforementioned. Some DI boxes are meant to emulate the sound of a bass head, like the SansAmp.
What kind of MIC do I need to record bass guitar?
Try using a brighter dynamic mic like an Sennheiser MD421, Audix i5, or even an SM57 on one of the smaller drivers, about one to two inches from the grille to capture some of the mid range and “string noise.” Alternatively, some engineers use a condenser mic in this position to capture even more detail.
What does a direct output on a bass guitar mean?
Most bass amps have what’s called a Direct Output, which is just a duplication of the signal being sent to the cab before it’s processed by the drivers. This output will give you a slightly more colored tone than the DI box, but a less colored tone than mic’ing the cab. In most situations, you’ll want to reach for a dynamic mic when tracking bass.
