How much does Pro Circuit suspension cost?
The price is exorbitant. At over $7000, this is not a purchase that can be taken lightly, nor is it one that short-circuits the age-old conundrum that the suspension still has to be valved perfectly to work perfectly.
What spring rate do I need dirt bike?
Right out of the box your spring rates are usually set for someone of average size — this typically means 75 to 80 kilos or 165 to 176 pounds. If you are lighter or heavier, that spring rate won’t perform as well for you.
What does a Pro Circuit linkage do?
Pro Circuit’s Linkage Arms are CNC (Computer Numerical Control) machined from billet aluminum and are designed to stiffen up the initial linkage curve and improve the geometry of the chassis, making the bike much more stable. This will also help eliminate the initial loose and wallowy feel.
What should my rider sag be?
Ideal rider sag can range from 25mm to 40mm or more, depending on the bike and how you intend to use it. A good rule of thumb is to aim for 30mm for street use, and 25mm for track use. 9. The sag amount is adjusted by adding or removing spring preload front and rear.
What is the best motocross suspension?
Best Dirt Bike Suspension 2021:
| Products | Rating | Price |
|---|---|---|
| TDPRO Rear Shock Absorber Adjust Suspension | 10 [Editor’s Choice] | Check Price |
| TDPRO 190mm 7.5″ Suspension | 9 | Check Price |
| Hongyu 315mm Air Suspension | 8.5 | Check Price |
| Hongyu 270mm Air Shock Absorber Suspension | 8 | Check Price |
What spring rate should I use?
Springs should typically be compressed 25-30% of the free length when supporting the weight of the vehicle. Drag race cars will normally use a lighter rate spring (about 30%) to promote weight transfer while a street car will use a firmer rate spring (about 25%).
How do I choose a rear shock spring?
In order to choose the correct size spring for your shock you will need to do a bit of groundwork. There are three things you will need to determine about your setup – the stroke of your shock, the maximum spring free length that your shock is designed to take, and your ideal spring rate.
What is PDS suspension?
It was the first KTM to use the Progressive Damping System (PDS) and had no linkage, only a solid mount between the swingarm and the Ohlins shock. Within the shock there was a needle that would engage a twin-piston design, progressively increasing damping through the stroke of the shock.
How important is free sag?
Static, or free sag is the amount the suspension compresses from fully unloaded under the bike’s own weight and is very important on any bike except full suspension MTB where the bike weight is so much less than the rider’s weight, the suspension does not compress under the bikes weight.
Is KYB suspension better than WP?
The WP tube is just a touch thicker than the KYB, which largely determines the overall stiffness. Also, the upper bushing on the WP is slightly higher than the KYB, so it does a little better job of reacting the bending moment.
What suspension does Yamaha use?
The trend in recent years for riders to enjoy riding aggressively on bumpy surfaces has created the need for suspensions with longer stroke. That is why Yamaha uses “double wishbone” type front suspensions on its 4-stroke models since the RX-1.
How to get an accurate pro circuit suspension quote?
For an accurate quote, please call Pro Circuit at (951) 738-8050. 1. Contact Us: Pro Circuit will ship you a suspension box with shipping material to protect your forks and shock (call for details). An alternative would be you shipping your suspension in a gun case. 2.
How to get Pro Circuit flyer for works suspension?
To download the Pro Circuit flyer for the Dual Spring Forks click here (PDF). If you are interested in upgrading your set of Works Suspension, or would like more information regarding the Dual Spring Works Forks, please call us at (951) 738-8050
Where can I buy dual spring works suspension?
If you are interested in upgrading your set of Works Suspension, or would like more information regarding the Dual Spring Works Forks, please call us at (951) 738-8050
What kind of suspension does a ProCircuit use?
The axle lugs are CNC-machined from billet aluminum and provide the ultimate strength, control and precise steering. The shock is oversized (18mm shock shaft) consisting of a 50mm hard-anodized Kashima coated body that offers less friction and reduced heat build-up.
