How do I change my DLink DIR-505 password?
- Step 1: Make sure your computer or mobile device is connected to the DIR-505 by Wi-Fi. Open your web browser and enter http://dlinkrouter or http://dlinkrouter.local into the address bar.
- Step 2: At the login page, enter the Admin Password. If you have not changed the administrator password, leave the field blank.
How do I access my DLink DIR-505?
Step 1: Make sure your computer or mobile device is connected to the DIR-505 by Wi-Fi. Open your web browser and enter http://dlinkrouter or http://dlinkrouter.local into the address bar. Step 2: At the login page, enter the Admin password.
How do I reset my DLink router username and password?
Resetting your D-Link® router’s Wi-Fi password is easy: Type your router’s IP address —192.168. 0.1— into your Web browser. At the login screen, select “Admin” from the drop down menu and enter your admin password.
How can I access my Dlink router?
Step 1: Open your web browser and enter the IP address of the router into the address bar (not in google). The default IP is 192.168. 0.1, or using the link: http://dlinkrouter.local. Step 2: You should be taken to a D-Link login page.
How do I setup my Dlink router as an extender?
Step 1: Plug the DAP-1520 into a wall outlet within wireless range of your router. Step 2: open the wireless utility on your computer, select the name (SSID) of the DAP-1520 network, and enter the password (both of these are found on the included Wi-Fi Configuration Card).
How do I reset my Dlink wireless router?
How do I reset my router to factory default settings?
- Step 1: With the router on, insert the end of a paper clip into the pinhole highlighted below.
- Step 2: Hold the paper clip down for 10 seconds and release.
- Step 3: The unit will reboot automatically. Once the WLAN light stops blinking, the unit has been reset.
- Note:
Why is my D Link extender not working?
D-Link Technical Support. Step 2: On the bottom of the DAP-1320 is a reset pinhole. Using a paperclip, press and hold the reset button for 10 seconds (or until the LED on the front turns red), and then let go. The extender will then reboot and be at factory default settings.
How to hard reset D-Link dir-505 Rev A1 router?
The D-Link DIR-505 rev A1 router has 300mbps WiFi, 100mbps ETH-ports and 0 USB-ports. It is also known as the D-Link SharePort Mobile Companion. Hold the button pressed for 10 seconds, then release. The unit will reboot by itself and once the WLAN light stops blinking the factory reset is done.
How do I Reset my dir-505 to factory default settings?
If you forget your router’s password, you can perform a reset to return all settings to the factory default. Step 1: While the router is on, use the end of a paper clip to press the button inside the pinhole on the underside of the router, as highlighted by the red circle below. Step 2: Hold the button down for 10 seconds and then release.
How do you Hard Reset a D-Link router?
It is also known as the D-Link SharePort Mobile Companion. Hold the button pressed for 10 seconds, then release. The unit will reboot by itself and once the WLAN light stops blinking the factory reset is done. Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.
How do I change the Wi-Fi password on my dir-505?
Step 1: Make sure your computer or mobile device is connected to the DIR-505 by Wi-Fi. Open your web browser and enter http://dlinkrouter or http://dlinkrouter.local into the address bar. Step 2: At the login page, enter the Admin Password. If you have not changed the administrator password, leave the field blank.
