How do I fix error 5B00 on Canon g2400?

Solution 1: (Get the printer into service mode)

Work out where the STOP button is.
Turn the printer off.
Press and Hold the Power button.
Wait about 2 or 3 seconds – the blue light will be on.
Press the STOP button 6 times.
Let go of the Power button.
The blue light will now start flashing for a while.

How do I get rid of the 5B00 error on my Canon printer?

How to fix Canon printer error 5b00

Step 1: Unplug the device.
Step 2: Press down and continue to hold the power button of the printer and plug the power cord into the wall socket.
Step 3: Hold the power button until the printer starts resetting itself.
Step 4: Wait for the green power light in the printer to turn off.

What is error code 5B00 on Canon printer?

The 5b00 error usually denotes a situation when a user cannot print due to the improper usage of the ink cartridge.

How do I reset my Canon ip2700?

Unplug the printer power plug from the mains. Press and hold the printer power button. In a state of pressing the button, turn on your printer again. Wait for 2-5 seconds, press the Resume button 2 times, and release it together with the power button.

How do I reset my Canon iP2770 manually?

Canon Pixma iP2770 Resetter

Turn off the printer without pulling the power cords.
Hold down Resume button and press Power button.
Keep holding down Power button and let Resume button go.
Then Press Resume button 5 times then let BOTH buttons go.

How do I fix error 5B00 on Canon g4000?

How do I fix error 5B00 on Canon G4010?

To reset Canon G4010 5B00 Waste Ink Counter Error – You should be PUT PRINTER IN SERVICE MODE! Then use WIC Reset Utility Tool with the Reset Key to reset your Canon G4010 printer. It takes less then 1 minute!

How do I troubleshoot my Canon iP2700?

How do I reset my Canon iP2700 ink absorber full?

Press and hold the Resume button, then press the power button. don’t release both buttons. Release the Resume button, and the Power button still holds. While holding the Power button, press the Resume button 4(four) times, press and hold the resume button once more, then release the power and the resume button together.