How much HP can 550cc injectors handle?
Typically, 550cc injectors are good for 350whp. You can get 350whp from 15psi from a GT30R or 10-12psi using a GT35R. I always make sure i run larger injectors than i need.
How much HP does 1000cc injectors add?
The 1000cc Injectors can support 650+whp.
What size injectors do I need for 400 hp?
On a 400 hp engine you will nedd four 500 cc injectors.
How much HP do bigger injectors add?
Larger throttle body and injectors A larger high-performance throttle body will deliver more horsepower. Depending on what type of engine you have, you can gain as much as 10-20 more horsepower and comparable torque. There is a catch, however. Go too large and you can lose power.
How much HP can 750cc injectors make?
Regardless of what some calculators may say, healthy 750cc injectors will easily and safely support over 800BHP all day long on gasoline.
How do you calculate fuel injector flow?
New Flow Rate:
- The formula to find the new FUEL FLOW rate after a fuel pressure change:
- Example 1: A 240 CC injector tested at 43.5 PSI is run at 50 PSI.
- So, the resultant change in pressure would yield the following: 240 cc/Min X 1.0721 = 257 cc/Min. 22.86 Lb/Hr X 1.0721 = 24.51 Lb/Hr. 36.58 Hp X 1.0721 = 39.22 Hp.
How much HP can LSA injectors handle?
The stock injectors are good to about 600 hp at the wheels. The stock dual fuel pumps are good to about 650 hp at the wheels.
How much horsepower will 60lb injectors support?
60′ will support 600+ rwhp with pump fuel…not the case with e85 at those levels!
How much HP will 60lb injectors support?
How much HP can 650cc injectors hold?
^^ Pretty much at 100% injector duty cycle, 650cc injectors are good for roughly 500hp assuming 1lb/min perfectly tuned equates to 10hp.
How much horsepower does a Nissan CA18DET have?
CA18DET-R: 185 PS (136 KW; 182 HP) at 6,400 rpm of horsepower and 240 Nm (24.5 kg·m; 177.1 ft·lb) at 4,000 rpm of torque. The Nissan CA18DET motor has a cast-iron cylinder block. The cylinder block, a monoblock special casting structure, employs a five-bearing-support system.
What kind of fuel injection does a Nissan CA18 use?
CA18 for Arex was delivered with Lucas multi port Fuel Injection. The CA18E is a naturally aspirated, 1.8 L (1,809 cc), single-cam engine. It uses Multi Point Fuel Injection. CA18S. The 1.8 L (1,809 cc) CA18 (s) was a carbureted version of the CA engine available in Japan.
How many horsepower does a Nissan CA engine have?
The 1.8 L (1,809 cc) CA18 (s) was a carbureted version of the CA engine available in Japan. It produces 66 kW (89 hp; 90 PS) and 149 N⋅m (110 lb⋅ft). Bore and stroke is 83 mm × 83.6 mm (3.27 in × 3.29 in). It was used in the following vehicles: CA18DE. The CA18DE is a 1.8 L (1,809 cc) DOHC 16v engine produced from 1987 through 1989.
What is the compression ratio of a CA18DE engine?
The CA18DE engine cylinder bore is 83.0 mm (3.268 in) and the piston stroke is 83.6 mm (3.291 in), compression ratio rating is 10.0:1. Each piston is fitted with two compression rings and a single oil ring. The cylinder block height is 204.8 mm (8.06 in). ATTENTION!
