What does a turn signal module do?
The Self Canceling Turn Signal Module™ is an electronic flashing relay that is meant to completely replace your existing mechanical flashing relay(s), or be a stand alone flashing relay to vehicles that do not have turn signals. It works with both LEDs or incandescent lights up to 10 amps per output(20 Amps Max).
What is an electronic flasher unit?
Flasher units are designed to control the flash rate of vehicle directional indicators; this is achieved by providing regular interruption of the electric current in the indicator circuit. Electronic flasher units are load sensitive, whereby if a bulb failure occurs the flasher rate increases to indicate the failure.
Do you need a special flasher for LED turn signals?
The reason most mechanical flashers won’t work with LEDs is that they require very little current flow, which is not enough to heat the internal strip and open the circuit. There are several types of electronic flashers available, however, not all of them are for LED applications.
Where is flasher relay?
Access the junction box where your flasher relay is located. The location of the junction box that holds the flasher relay will depend on the make and model of your vehicle. In some models, it is located in the engine compartment near the battery. On other models it is located near or in the steering wheel column.
What happens when a turn signal flasher goes bad?
The most common symptom of a bad or failing turn signal / hazard flasher is hazards or turn signal lights that do not function. If the flasher breaks or has any internal issues it can cause the lights to malfunction, or not respond at all when the turn signal lever or hazard light button are pressed.
What is the difference between a flasher and a relay?
The hazard and turn signal lights found on the vast majority of road going vehicles are controlled by a flasher, which is commonly referred to as a relay. The flasher is an electrical component that serves as the switch that allows the lights to flash on and off.
Do you need a relay for LED turn signals?
if you replace any pair of turn signals with leds, you’ll need a relay or resisters. the relay is plug/play and works VERY well.
How many amps does a turn signal module use?
It works with both LEDs or incandescent lights up to 10 amps per output (20 Amps Max). This module does not require any load equalizers because it is a self-timed electronic relay.
How does the self canceling turn signal module work?
Please Note:The Self Canceling Turn Signal Module™ requires momentary push buttons to operate (not included). Latching-type switches, or push to cancel type switches, will not work properly because these types of switches send constant power to your turn signals when on and will defeat the main purpose of the self canceling feature.
Which is the smartest turn signal module in the world?
World’s smartest turn signal module will automatically cancel turn signal after every manoeuvre. Count on it. It gathers 300 data elements per second on motorcycle’s movement. Detecting acceleration and vibrations when completing manoeuvres. Combined with an advanced algorithm it can accurately detect the end of your manoeuvre.
How does the smart turn system work on a car?
Smart Turn System detects each turn and cancels the turn signal at the right moment. It cancels your turn signals only after you exit the roundabout. It also detects the change of lanes and cancels turn signal accordingly. What other items do customers buy after viewing this item?
