What is a UPS network card?
Find a Reseller Support. Remote monitoring and control of an individual UPS by connecting it directly to the network. APC UPS Network Management Cards allow for secure monitoring and control of an individual APC UPS via web browser, command line interface, or SNMP.
What is APC in network?
The Smart-UPS is a series of enterprise-level uninterruptible power supplies (UPS) made by American Power Conversion (APC). With the exception of RT and SRT series, Smart-UPS units are line-interactive UPS systems, only running their inverters when the grid power is unavailable.
How do I reset my AP9631 network management card?
Factory reset APC AP9631 Network Management Card 2
- Turn on your APC UPS.
- Make sure your NMC has some LEDs on, which means it is at least alive.
- Stick a paper clip into the reset button, and hold it for at least 30s or until the status LED goes from green to amber.
- Release the reset button and click press it again.
How do I reset my APC UPS card?
Locate the APC network management interface on the back of your APC UPS. Press the reset button for 20 seconds. Wait for the network led change to the orange color. The APC UPS network management interface will reset its configuration back to the factory default.
What is full form APC?
1. The definition of apc is an abbreviation for an armored personnel carrier which is a vehicle the military uses to move troops. An example of a place in which an APC might be used is Afghanistan.
How do I connect to APC UPS?
Connect the Battery in the New APC UPS Open the battery compartment. Pull the battery out half way. Connect the Red Battery Wire to the + Positive battery terminal. Push the battery into the compartment and re-install the cover.
How do I reset my APC Network Management Card?
How do I reset my apc Network Management Card?
Tutorial APC UPS – Reset the Management interface Locate the APC network management interface on the back of your APC UPS. Press the reset button for 20 seconds. Wait for the network led change to the orange color. The APC UPS network management interface will reset its configuration back to the factory default.
How do I reset my apc management card?
Tutorial APC UPS – Restart the management interface only Open your browser and enter the IP address of the APC UPS. After a successful login, you will be sent to the APC UPS Dashboard. Select the Reboot Management Interface and click on the Apply button. In our example, the Network Management Interface will restart.
What is APC AP9631 UPS network management card 2 with environmental monitoring?
VMware Ready PowerChute software can shut down multiple servers during outages The APC AP9631 UPS Network Management Card 2 with Environmental Monitoring allows users to monitor and control their APC UPS systems via secure network browsers or external command line interfaces.
Which is the best UPS network management card?
Enable management of your UPS by connecting it directly to the network. Universal sensor that monitors temperature and humidity in your Data Center or Network Closet. Universal sensor that monitors temperature in your Data Center or Network Closet. Remote monitoring and control of an individual UPS by connecting it directly to the network.
What do you need to know about ups APC?
Supports up to four access levels – Administrator, Device User, Read-Only User and Network-only User – with user name and password requirements. Use an existing radius server to securely authenticate, authorize, and account for your APC device. Real-time event notification minimizes response times to critical physical infrastructure situations.
What does network management card ex-APC USA do?
An IT-ready, scalable access monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network Pinpoint the timing and sequence of events leading up to an incident with the event log.
