What is the chemical composition of 4140 steel?
AISI 4140 is versatile because of its simple chemistry and has the following composition: 0.40 % carbon and 0.85 % manganese which offers toughness and can be heat treated and hardened 0.1 % chromium adds to overall toughness but is not enough to be made into stainless steel.
What kind of steel is 4140?
AISI 4140 alloy steel is a chromium-, molybdenum-, and manganese-containing low alloy steel. It has high fatigue strength, abrasion and impact resistance, toughness, and torsional strength.
Is 4140 heat treatable?
4140 responds readily to heat treatment and is comparatively easy to machine in the heat treated condition. 4140 resists creep in temperatures up to 1000° F and maintains its properties even after long exposure at these relatively high working temperatures.
What is the Rockwell of 4140?
4140 (modified) Cold Finished, Annealed Alloy Bar Stock Typical hardness is Rockwell “C” 19/24. Typical tensile strength 114,000 PSI. Its wear resistant properties far exceed that of “cold roll” steels.
How is 4140 heat treated?
For 4140 steel, the recommended heat treatment [1] consists of heating to austenitizing temperature, typically 1570°F (855°C), followed by oil quenching. Tempering (reheating after quenching) will achieve the desired hardness range.
Can 4140 be water quenched?
Due to its carbon content, it is most often water quenched to attain a maximum as-quenched hardness of approximately 48 HRC. For 4140 steel, the recommended heat treatment [1] consists of heating to austenitizing temperature, typically 1570°F (855°C), followed by oil quenching.
What are the types of steel 4140?
AISI 4140 Alloy Steel (UNS G41400) Alloy steels are designated by AISI four-digit numbers and comprise different kinds of steels, each with a composition which exceeds the limitations of B, C, Mn, Mo, Ni, Si, Cr, and Va set for carbon steels. AISI 4140 alloy steel is a chromium-, molybdenum-, and manganese-containing low alloy steel.
What is the hardness of 4140 steel?
4140 Heat Treated is a chromium-molybendium alloy steel. 4140 HT is the most commonly used high tensile steel with endless applications including everything from gears and pumps to various applications in the automotive and construction industry. 4140 HT has a medium hardness of 28/32 HRC.
What is the tensile strength of 4140 steel?
There are several important mechanical properties of AISI 4140, including: Tensile Strength: AISI 4140 steel typically has a target ultimate tensile strength of around 95,000 psi.
Is there a maximum hardness level for 4140?
The maximum hardness that can be obtained in any steel depends on carbon content. The section size in which maximum hardness can be obtained depends on alloy content. 4140 has a nominal carbon content of .4% and this carbon content will yield a hardness of Rc 51 for a 90% martensitic structure (9th Edition of the ASM Material Handbook,Volume I).
