What tools do I need to change my rear brakes?
Tools Required
- Disposable mechanic’s gloves to protect your hands and keep them clean.
- Jack and jack stands.
- Lug wrench.
- C-clamp or length of wood to retract the piston.
- Wrench (choose a socket, open end or adjustable wrench)
- Turkey baster for drawing out brake fluid.
- Plastic tie, bungee cord or piece of string.
Should car be in neutral when changing brakes?
You should have the parking brake cable released at all times when turning back the pistons. Once the new pads are installed and caliper is installed then pump the brakes using only short strokes. Do not push the pedal all the way down or master cylinder may be damaged.
How do you release the pressure on a rear brake caliper?
Push-Type Caliper Piston This is the simpler version, and luckily it’s by far the most common. The method to release pressure is to open the bleeder screw, push the piston back into the caliper, then close the bleeder screw.
Why do rear calipers screw in?
That mechanism, which is connected to the parking brake linkage, has a screw setup to compensate for the fact that in normal footbrake operation, the piston automatically moves out to adjust for brake shoe lining wear. When the foot brake is released, hydraulic pressure in the caliper cylinder also is released.
How long do brake discs usually last?
50,000 miles
Generally, brake discs should last more than 50,000 miles on average, but a number of factors affect the lifespan. If you keep them well maintained and drive sensibly, you may be able to get up to 80,000 miles out of one set!
How many miles should brakes last?
How Many Miles Do Brakes Last? Average brake life runs between 25,000 and 65,000 miles, though some people will have brake pads last beyond 80,000 miles. While it’s impossible to give an exact number, the 40,000-mile range is the general mileage to keep in mind when planning for vehicle maintenance.
