How can I make my C10 handle better?
Without spending many thousands of dollars on aftermarket clips or full custom frames the best options are to drop it, get a nice set of front/rear sway bars, and cram as much tire under it as you can (this is where trucks excel). If you can move weight around to better balance it, then that’s great.
What does C10 stand for on a Chevy truck?
The “C” in C10 indicates that the truck is a two-wheel drive model. The Chevrolet C/K series consisted of two-wheel drive trucks, labeled with a “C”, and four-wheel drive trucks, designated by the letter “K.” The C10 was the half-ton, two-wheel-drive model within the C/K line of trucks.
How many leaf springs does a C10 have?
C10 would have 4-8 depending on the suspension options. There were also 2 different length springs.
What Motor came in a 1978 C10?
Engine and Transmission Specifications
| Engine | Models | Horsepower |
|---|---|---|
| 250 CID L6 | C10 Big Ten K10 | 115 hp @ 3,800 RPM |
| 292 CID L6 | C20 K20 | 120 hp @ 3,600 RPM |
| 305 CID V8 | Optional for: C10 | 145 hp @ 3,800 RPM |
| 350 CID V8 | Optional for: C10 Big Ten C20 K10 | 155 hp @ 3,800 RPM |
How much does a 1982 Chevy C10 weight?
1983 C10 weights – The 1947 – Present Chevrolet & GMC Truck Message Board Network. Lastly, where is the reverse switch located, Column or trans?? The shortbed C-10 is around 4000 lbs without a load.
How many leaf springs does a Chevy 2500 have?
Next up, the leaf springs. A 2500HD has five leaf springs, four mains and one overload positioned under the mains with no bump stops.
How long is a 1986 Chevy C10?
Chevrolet C/K (third generation)
| Third generation (Rounded Line) | |
|---|---|
| Length | 191.5 in (4,864 mm)(1973–75) 191.3 in (4,859 mm)(1987) 211.8 in (5,380 mm) 246.4 in (6,259 mm) |
| Height | 69.8 in (1,773 mm) |
| Chronology | |
| Predecessor | GM C/K (Action Line) |
What engine came in a 1986 Chevy C10?
The 1986 Chevy truck featured two- and four-wheel drive, four- or six-cylinder, 2.5-liter engines and manual five-speed or four-speed automatic transmission.
How much is a 1982 Chevy C10 worth?
**Figure based on a stock 1982 Chevrolet C10 1/2 Ton valued at $9,000 with OH rates with $100/300K liability/UM/UIM limits. Actual costs vary depending on the coverage selected, vehicle condition, state and other factors.
What kind of suspension do I need for a Chevy C10?
Aldan American manufactures high performance suspension upgrade parts for your Chevy and GMC Trucks including C10, C15, R10, and R15 models with suspension lowering kits. Our full line of suspension products are designed to replace factory tubular arms, coilovers and shocks – Aldan suspension lowering kits are direct bolt on replacement parts.
What kind of suspension do I need for a 1960 Chevy?
If you own a 1960-91 Chevy our Chevy C10, and Chevy C20 suspension kits will drastically improve the ride quality in your pickup.
What do suspension upgrades do for a Chevy truck?
Suspension upgrades will allow more flexibility in ride height adjustments and improved handling. The ’67 to ’72 and ’73 to ’87 generations of Chevy and GMC trucks sold millions, and many have survived to be restored and modified. “They just look good when they’re customized,” reminds Salgado.
What kind of suspension does a TCI C10 have?
TCI developed a torque-arm/coilover suspension for the ’67-’72 models and a four-link/coilover system for the ’73 to ’87 models. Heidt’s has a four-link/coilover kit that covers all the model years from ’67 to ’87. Nothing good is ever easy, and there were challenges in developing these suspension kits.
