Can Bluetooth speakers be water damaged?
Generally speaking, waterproof Bluetooth speakers are not designed to be submerged in water, as this could cause lasting damage to the device.
How do you connect Bluetooth to water speakers?
You can connect the Bluetooth Water Speaker to another Bluetooth Water speaker or one other type speaker. Under Bluetooth or AUX Mode, plug the mini USB end of Line-out cable into mini USB to AUX slot of the speaker and the other end into AUX slot of other speaker or audio device.
Why won’t my water speakers work?
No sound–Check the stereo mini plug connection and turn the connector slightly to ensure proper contact. Make sure that the USB plug is connected properly. Also, make sure sound is coming from your audio device. Sound is too high/low–adjust the volume on the audio device, or press the volume buttons on the speaker.
What happens if a speaker gets wet?
If the speaker gets wet, first remove the water from the speaker, and then wipe off the moisture on the speaker using a soft, dry cloth. Especially in cold regions, leaving moisture on its surface may cause the speaker to freeze and malfunction. Be sure to wipe off the moisture after using the speaker.
Can you put a speaker in rice?
Placing your phone in uncooked rice for a day or two can help by sucking the moisture out, but some delicate parts may be irrevocably damaged. It’s entirely possible for the internal speaker to be damaged but for the headphone jack, which is almost always a different hardware component, to remain perfectly intact.
Can you refill water speakers?
On the bottom of the water canister you will see a hole where the water was inserted. There will be a black plug covering the hole. Using your screw driver you can pry the plug out. Once the plug is taken out you can refill the speakers.
How do I charge my water speakers?
Use the included USB cable to connect the speakers to a USB power source to charge the battery. Connect the small end of the cable to the USB charge port  of the unit. Connect the large end of the cable to a high-power USB port of a computer. The computer should be powered on.
How do you refill Dancing Water speakers?
How do I put more water in my water speakers?
Is it okay for speakers to get wet?
If the speaker gets wet, first remove the water from the speaker, and then wipe off the moisture on the speaker using a soft, dry cloth. Be sure to wipe off the moisture after using the speaker. Put the speaker on a towel or dry cloth. Then leave it at room temperature and dry the speaker until no moisture remains.