How do you change a brake light on a Ford Focus?
How to Change a Brake Light on a Ford Focus
- Turn the exterior lighting switch next to the steering wheel off.
- Remove the two plastic Phillips screws from the trunk compartment.
- Remove the two case nuts with a socket wrench.
- Turn the brake bulb counterclockwise to detach it.
Can I use 3057 instead 3157?
Ans: When looking at the 3057 bulb compatibility to the 3157, they can act as each other’s replacements. The defining factor is that they have the same plastic wedge base; hence, their interchangeable use. However, do not replace the 3157 with the 3057 in daytime running light.
How do you change a tail light cover?
You need to pull away or unscrew the cover from around the back of the broken taillight/turn-signal cover to gain access. This exposes the bulb connections at the back of the taillight. Grip firmly at the back of the bulb and push it in. Twist counter-clockwise to remove it from the broken taillight/turn-signal cover.
How do you change the brake light on a Ford Focus?
The brake bulb is the middle bulb in the Focus’ brake light case. Grasp the bulb softly and pull it away from its socket. Insert the replacement brake bulb into the socket. Push it down gently to install it. Insert the setup into its hole and twist it clockwise.
How do you replace a brake light bulb?
Grasp the bulb softly and pull it away from its socket. Insert the replacement brake bulb into the socket. Push it down gently to install it. Insert the setup into its hole and twist it clockwise. Set the brake light case in its mount. In the trunk compartment, reattach and tighten the two nuts.
What to do when your brake light stops working?
If the LED brake light stops working, visit an authorized Ford service center. Turn the exterior lighting switch next to the steering wheel off. Open the Focus’ trunk. Remove the two plastic Phillips screws from the trunk compartment. There are two screws on each side, one set for each brake light case. Pull the access cover off.
